1. Wide adaptability, diamond wire saws are suitable for all types of mines, such as marble, granite, limestone, travertine, quartz stone and other mines mining, of course, cutting different stone, you need to use the corresponding wire saw products, such as marble, need to use a wire saw suitable for cutting marble cutting
2. The mining surface is large, the diamond wire saw can cut tens of meters or even hundreds of meters high mines, the maximum cutting area can reach 500 square meters, such a large stone, is other cutting methods can`t be completed, and such mining surface also makes the block mining more simple and efficient.
3. Efficient, the cutting surface of wire saw mining is very smooth, such a block almost does not need to be trimmed in the later stage, can be used directly for cutting, so in terms of process, let the mining process be simplified, but also let the post-processing have higher efficiency, in terms of cutting, if the use of brazed beaded rope mining marble, 50-70 square meters per hour Mining rate is more stable than other mining tools, the efficiency is also much higher.
4. The wire saw can cut vertically, horizontally, beveled and other directions, and can also perform blind cutting, while other methods can only be cut straight, or the cutting angle cannot be determined, which is impossible for other tools to complete.
5. The material completion rate is extremely high, the diamond wire sawing rate is very high, and other ways are different, the diamond wire saw cutting seam is very thin, in addition, almost no damage will occur, compared to blast mining, this mining method is undoubtedly a very high rate of mining methods.
6. Safety and environmental protection, safety and environmental protection, rope saw mining noise-free dust, does not affect the nearby residents and other working surfaces, and the degree of automation is high, separation control, low labor intensity of workers, high safety, especially in dust control, noise control, diamond wire saws can greatly reduce pollution.
7. The cutting environment requirements are low, if the disc saw is mined, the ore body flatness requirements are extremely high, but the wire saw machine does not have high environmental requirements, as long as there is a short distance platform, you can meet the cutting requirements.